Smart Thermostat for Water Heating System
EB-001WWH is a thermostat specially designed for water heating system, stylish piano key shape and simple installation design, it not only meets the temperature control of underfloor heating, but also provides smart phone remote control, voice control and other functions in smart home.
Main Features
EB-001WWH thermostat is designed for smart commercial, industrial and home use and is the Reddot design adward 2018 winner.
On the display screen, a highly recognizable icon is designed according to the corresponding functions. The negative display screen plus acrylic panel can provide a good display effect in any use scenario. Users can enjoy a good interactive interface during operation.
The stylish piano key design, advanced pigment coating technology and stable mechanical structure are not only suitable for modern decoration style, but also provide convenient and efficient operation solution.
It adopts the widely used 86 * 86 and European 60mm combination, which is suitable for most users in the world. In addition, the hook type installation is very convenient.
Excellent Screen Design
- We have designed high identification icons for heating function, lock screen function, cloud connection, WiFi connection, home mode, digital display and other functions
- LCD negative display screen has the characteristics of good visual impact, not easy to reflect light, good concealment and low energy consumption
Piano Button Design
- Advanced surface coating
- Stable mechanical structure, long service life
- Large key, easy to operate
- Professional aesthetic design
Parameters
| Model | EB-001WWH |
|---|---|
| Color | White/Silver |
| Screen | LCD |
| Input | 220 VAC ± 10%50/60 HZ |
| Sensor | NTC 10K B:3950 |
| Temp Range | 5~35℃ |
| Accuracy | ±1℃ |
| Size | 86*86*13 mm |
| Output | 5A |
| Power Consumption | ≤1.7 KWh/month |
| APP | Android / iOS |
Dimension
Screen & Button Reference
a: Current Temperature
b: Target Temperature
c: Loading, Lock, Cloud Connection, WiFi Connection (from left to right)
Press ” M “: Switch Mode
Press ” M ” 3 seconds: Power on or off
Press ” + “: Increase the temperature
Press ” – “: Decrease the temperature
Press ” – ” 3 seconds: Enter the pairing WiFi mode
” M “” – “: Press ” M ” and ” – ” together for 3 seconds to lock or unlock
Wiring Diagram
- Pin 1: Connect to the normally close valve (NC)
- Pin 2: Connect to the normally open valve (NO)
- Pin 3: Connect to Live Wire (L)
- Pin 4: Connect to Negative Wire (N)
- Pin 5 & 6: Connect to the external sensor (NTC)
Installation Instruction
- Environment: Install to a octagon box, power by 100V ~ 240Vac
- Power off: Before you install, must cut off the power
Install Steps
- I: Connect each wiring
- II: Connect the steel to the octagon box
- III: Buckle up the power box and panel
Connect To the WiFi Internet
- Step #1: search “Smart Life” in Google Play or Apple Store and install the APP
- Step #2: press ” – ” button for 3 seconds, WiFi signal/icon will flash quickly in the screen
- Step #3: open the APP, and enter the “add device” page, select the type of product
- Step #4: input the SSID and password, then pairing
- Step #5: APP will automatically complete the connection, turn to the APP home page and start to use the APP for thermostat control
Advanced Settings
Turn on the thermostat, keep pressing the ” + ” and ” – ” buttons for about 5 seconds, press ” M ” to select the setting function, and press ” + ” and ” – ” to enter the below configuration options.
- Code #1: Sensor type (00: Internal Sensor 01: External Sensor 02: Internal & External Sensor Default: 00)
- Code #2: High temperature protection (Optional range: 35~95℃ Default: 65℃ Cancel the protection: “–“)
- Code #3: Operating temperature gap: 1-9℃, default is 2℃
- Code #4: Temperature calibration: -9℃~+9℃, default is 0℃
- Code #5: Highest target temperature: 35~90℃, default is 35℃
- Code #6: Lowest target temperature: 0~30℃, default is 5℃
- Code #7: HOME mode target temperature: default is 22℃ (Adjustable)
- Code #8: AWAY mode target temperature: default is 15℃ (Adjustable)
- Code #9: AUTO mode target temperature: default is 20℃ (Adjustable)
- Code #10: System restart, press ” + ” or ” – ” to switch the ” — ” to ” == “ and wait for 5 seconds
- Code #11: Factory setting, press ” + ” or ” – ” to swith the ” — ” to ” == ” and wait for 5 seconds
Other Operation
- a. External & Internal Temperature Check: long press the ” M ” and ” + ” to switch the internal temperature or the external temperature
- b. Temperature Protection Warning: when the temperature is higher the protection value, loading icon will flash, the heater stops working, and adjust the temperature to 2℃ lower of the protection value, loading icon will stop flash and the protection mode cancel
- c. ERR Exception: when the ” err ” icon light up, it means the sensor mode was wrong or the sensor was broken, then the temperature value in the screen will show ” — “
Tip
In order to improve product quality and experience, the product may be upgraded many times.
System Diagram
