Connettori D-Sub / VGA
Produttore
- Amphenol CONEC
Confezione
Imballaggio di
- -
- 164A
- 241A
- 163A
- MicroTCA™
- 242A
- 163C
- 161A
- 162A
- SlimCon
- 165X
- Snaplock
- 243A
- 163X
- 164X
Stato della parte
- Bulk
- Bag
- Box
- Tray
- -
- Tape & Reel (TR):::Cut Tape (CT)
- Tape & Reel (TR)
Tipo del connettore
- Active
- Obsolete
Tipo di tipo
- Receptacle, Female Sockets
- Plug, Male Pins
- Receptacle, Female Sockets and Male Pins
- Plug for Male Contacts
- Receptacle for Female Contacts
Il numero di posizioni
- Coaxial
- Signal
- Power
Shell Size - Inserto
- 62
- 44
- 2
- 3
- 7
- 15
- 37
- 25
- 26
- -
- 9
- 3 (Power)
- 5 (Power)
- 50
- 78
- 7 (5 + 2 Power)
- 17 (15 + 2 Power)
- 13 (10 + 3 Power)
- 43 (41 + 2 Power)
- 24 (17 + 7 Coax or Power)
- 25, 25
- 7 (5 + 2 Power) x 2
- 21 (17 + 4 Coax or Power)
- 9, 9
- 11 (10 + 1 Coax or Power)
- 7 (5 + 2 Coax or Power)
- 36 (32 + 4 Coax or Power)
- 5 (Coax or Power)
- 17 (15 + 2 Coax or Power)
- 15, 15
- 9 (5 + 4 Coax or Power)
- 13 (10 + 3 Coax or Power)
- 17 (12 + 5 Coax or Power)
- 9, 15
- 25 (22 + 3 Coax or Power)
- 8 (Coax or Power)
- 11 (10 + 1 Power)
- 3 (Coax or Power)
- 2 (Coax or Power)
- 25, 37
- 9 ~ 37
Dimensione del contatto
- -
- Male Pin
- Female Socket
- Signal
- Signal and Power
- Signal and Coax or Power (Not Included)
- Power
- Coax or Power
- Male Pin, Right Angle
- Signal and Coax or Power
Tipo di montaggio
- -
Caratteristica di montaggio
- Panel Mount
- Free Hanging (In-Line)
- Panel Mount, Through Hole
- -
- Through Hole
- Through Hole, Right Angle
- Panel Mount, Through Hole, Right Angle
- Board Edge, Through Hole, Right Angle
- Board Edge, Surface Mount, Right Angle
Temperatura di funzionamento
- Contacts Not Included
- -
Dimensione della conchiglia, MIL
- -
- -55°C ~ 125°C
- -55°C ~ 105°C
- -40°C ~ 105°C
- -25°C ~ 85°C
- -25°C ~ 105°C
Protezione dell'ingresso
- Black
- Silver
- Yellow
Lo schermaggio
- -
- IP67 - Dust Tight, Waterproof
- IP20
Il grado di laurea
- Shielded
- -
- Unshielded
Valutazione di infiammabilità del materiale
- Metal
- -
- Plastic
Le caratteristiche
- -
- UL94 V-0
Inserire il materiale
- -
- Cover
- IP20
- Lanyard
- Board Lock
- Shielded
- Mounting Brackets
- Dust Tight, Waterproof
- Grounding Indents
- Gasket
- Insulation Support
- Filter
- Snap Lock
- Dust Tight, Lanyard, Waterproof
- Water Resistant
- Board Lock, Filter
- Board Lock, Grounding Indents, Mounting Brackets
- Board Lock, Mounting Brackets
- Board Lock, Grounding Indents
- Board Lock, Filter, Grounding Indents
- Filter, Grounding Indents
- Board Lock, Filter, Mounting Brackets
- Board Lock, Gasket
- Mounting Hardware, Strain Relief
- 4-40, Hardware Included
- 4-40, Hardware Included, Shielded, Water Resistant
- 4-40
- Hardware Included
- 4-40, Hardware Included, Shielded
- 4-40, Hardware Included, Lanyard
- 4-40, Dust Tight, Hardware Included, Lanyard, Waterproof
- M3, Dust Tight, Hardware Included, Waterproof
- Clip
- Mating Screws 4-40
- Dust Tight/Waterproof (IP67), Mating Screws 4-40
- Slide Lock
- Mating Screws
- IP20, Mating Screws 4-40
- Slide Lock, Spring
- Mating Screws M3
- Dust Tight/Waterproof (IP67), Mating Screws M3
- IP20, Slide Lock, Spring
- High Density (HD)
- Insulator, PTFE
- Wire Bridge
Incluso il prezzo per
- 13-0000
- 3003W3P
- 163A182
- 242A176
- 242A206
- 6STD37P
- 241A165
- 3005W5S
- 3013W6S
- 3008W8S
- 3007W2S
- 3017W2S
- 163A112
- 164A102
- 302W2CP
- 164A121
- 164A167
- 164A166
- 163A166
- 15-0005
- 303W3CP
- 13-0001
- 3036W4S
- 3005W5P
- 3007W2P
- 302A100
- DLS1XS5
- 321WA4S
- 4STD09S
- 15-0063
- 302A101
- 3013W3S
- 162A100
- 3009W4P
- 15-0064
- 3009W4S
- 6STD15S
- 302W2CS
- 3011W1S
- 242A270
- 321WA4P
- 3003W3S
- 3017W2P
- 3024W7S
- 163A177
- DLS1XP5
- 301A101
- 3025W3S
- 3013W3P
- 3017W5P
- 3011W1P
- 164A101
- 3025W3P
- 3024W7P
- 164A189
- 303W3CS
- 164A133
- 241A269
- 164A191
- 242A100
- 241A271
- 242A268
- 241A106
- 163A187
- 242A150
- 241A160
- 3043W2S
- 3008W8P
- 13-0002
- 161A102
- 242A183
- 241A275
- 165X147
- 160X103
- 165X129
- 160X111
- 600X517
- 165X167
- 165X170
- 16-0011
- 16-0003
- 15-0000
- 165X131
- 165X171
- 165X169
- 160X104
- 160X109
- 165X175
- 165X130
- 600X518
- 16-0009
- 160X101
- 165X168
- 16-0002
- 15-0001
- 16-0004
- 160X106
- 160X107
- 765-329
- 799-101
- 795-907
- 799-102
- 16-0021
- 16-0022
- 16-0010
- 320X125
- 163C500
- DAH1SSA
- DAH1PPAA
- 243A116
- 243A138
- 6STD09A
- 320X105
- 163A500
- 164A039
- 164A033
- 243A100
- 243A117
- 243A101
- 165X134
- 165X101
- 165X026
- 16-0018
- 165X109
- 165X112
- 165X173
- 165X148
- 165X108
- 165X116
- 300X101
- 165X104
- 165X133
- 165X118
- 165X027
- 165X033
- 165X110
- 165X179
- 16-0017
- 16-0000
- 165X151
- 15-0047
- 165X150
- 165X103
- 165X132
- 165X174
- 165X113
- 165X135
- 165X165
- 15-0046
- 300X107
- 300X111
- 600X570
- 165X102
- 165X511
- 165X042
- 165X117
- 600X512
- 165X144
- 165X145
- 165X119
- 165X164
- 165X007
- 165X178
- 600X511
- 16N6100
- 162A118
- 131A150
- 132A120
- 131C101
- 131J210
- 131J200
- 132J200
- 131J250
- 13-0003
- 131J310
- 131J240
- 132J210
- 132J240
- 131J150
- 132C120
- 161A180
- 161A182
- 131C150
- 132A150
- 131C100
- 132C150
- 161A133
- 161C180
- 161A183
- 162A187
- 131A100
- 132A110
- 132A100
- 131C111
- 131C110
- 132C110
- 132C100
- 132J300
- 161A134
- 131A110
- 132J150
- 132J140
- 131J140
- 131J300
- 162A184
- DSS3XSX
- 163X101
- 163X100
- 164X117
- DSS3XPX
- DSS2XPX
- DSS1XSX
- DSS2XSX
- 164X119
- 163X102
- 5008W8S
- 164X118
- DSS4XSX
- 740-353
- 740-331
- 740-342
- 16-0006
- 160X102
Il Mfr
- 3 pcs - 1 Connector, 2 Jack Screws
- 5 pcs - 1 Connector, 4 Jack Screws
Contatto Finitura - Mating
- Amphenol CONEC
Le applicazioni
- Copper Alloy
- -
- Brass
- Phosphor Bronze
La cessazione del contatto
- -
- 22 AWG
- 24-28 AWG
- 20-24 AWG
- 20 AWG
- 10-12 AWG
- 16-20 AWG
- 26-28 AWG
- 12-14 AWG
- 8-10 AWG
- 12-14 AWG; 20 AWG
- RG-179, 187
- RG-174, 188, 316
- RG-178, 196, 404
- RG-316
- RG-58C, 141A
Pin o Presa
- Solder
- Crimp
- Solder, PCB
- Solder Cup
- Crimp and Solder
- Solder Inner, Crimp or Solder Outer
Contatto Finitura Spessore
- Gold
- -
Spessore del bordo
- 50.0µin (1.27µm)
- -
- 30.0µin (0.76µm)
- Flash
- 8.00µin (0.203µm)
- 51.2µin (1.30µm) Inner, 31.5µin (0.80µm) Outer
Valutazione corrente (Amps)
- -
- 500
- 250
- 50
Stile della clip
- -
- 3A
- 5A
- 3 A
- 7.5A
- 20A
- 5A, 20A
- 7.5A, 24A
- 7.5A, 40A
- 7.5A, 20A
- 5A, 35A
- 7.5 A
Spessore della cornice
- Solder
- Solder Cup
- -
Tasso di trasferimento
- Black
- Silver
- Gray
- -
- Green
Tipo di flessione piatto
- -
- D-Sub Connectors
- D-Sub Connectors, Male
- D-Sub Backshell
- D-Sub Connectors, Female
- D-Sub Slide Lock
FFC, spessore di FCB
- 1
- 2
- 3
- 4
- -
- 2, 2
Materiale dell'alloggio
- 100 V
- 60 V
- -
- 250V
- 100V
- 125V
- 60V
- 125 V
Le specifiche
- Cap (Cover)
- Cap (Cover), Sealing
- Cap (Cover), Protective
- Cap (Cover), Dust
- Retainer Clip
- Cable Clamp
- Hex Nut
- Grommet
- Spring Latch Clip
- Nut, Square Head 4-40
- Cap (Cover), Screen
- Slide Lock
- Locking Kit
- Cable Clamp Assembly
- Two Piece Backshell
- One Piece Backshell
- Gender Changer
- Hinged Backshell
- Jackscrew Socket
- Jackscrew, Slotted
- Jackscrew Socket, Slotted
- Locking Screw
Semplice / Duplex
- -
- Polyester
- Polybutylene Terephthalate (PBT)
- Plastic
- Acrylonitrile Butadiene Styrene (ABS)
- Polybutylene Terephthalate (PBT), Glass Filled
- Copper Alloy
- Zinc Die Cast
- Polypropylene (PP)
- Polyamide (PA), Nylon, Glass Filled
- Polyamide (PA), Nylon
- Polyamide (PA66), Nylon 6/6, Glass Filled
- Polyamide (PA6), Nylon 6
- Metal, Zinc
- Plastic, Metallized
- Acrylonitrile Butadiene Styrene (ABS), Metallized
- Polycarbonate (PC), Glass Filled
Stile di cessazione
- 4-40 Socket, 4-40 Screw
- 4-40
- M3 Socket, M3 Screw
Convertire (Adapter End)
- D-Sub, 9 Pin Male
- D-Sub, 9 Pin Female
- D-Sub, 25 Pin Female
- D-Sub, 15 Pin Male
- D-Sub, 15 Pin Female
- D-Sub, 25 Pin Male
- D-Sub, 44 HD, Male
- D-Sub, 62 HD, Male
- D-Sub, 37 Pin Female
- D-Sub, 15 HD, Female
- D-Sub, 15 HD, Male
- D-Sub, 37 Pin Male
- D-Sub, 26 HD, Male
- D-Sub, 50 Pin Male
- D-Sub, 44 Pin Male
Numero di coppia
- D-Sub, 37 Pin Male
- D-Sub, 9 Pin Male
- D-Sub, 9 Pin Female
- D-Sub, 44 HD, Female
- D-Sub, 62 HD, Female
- D-Sub, 15 Pin Male
- D-Sub, 37 Pin Female
- D-Sub, 25 Pin Female
- D-Sub, 15 Pin Female
- D-Sub, 15 HD, Female
- D-Sub, 15 HD, Male
- D-Sub, 26 HD, Female
- D-Sub, 50 Pin Female
- D-Sub, 25 Pin Male
Il numero di colonne
- D-Sub
- -
- Gender Changer
- D-Sub, Combo
- D-Sub, High Density
- D-Sub, Combo - Stacked
- Connector Saver
Lunghezza - Bobe Retracted
- Round
- -
- Flat
- Flat, Round
Caratteristica della flangia
- 1 (DE, E)
- 5 (DD, D) - 24W7
- 5 (DD, D) - 36W4
- 5 (DD, D) - 43W2
- 5 (DD, D)
- 4 (DC, C) - 13W6
- 2 (DA, A)
- 4 (DC, C) High Density
- 3 (DB, B)
- 2 (DA, A) High Density
- 4 (DC, C) - 25W3
- 5 (DD, D) High Density
- 4 (DC, C)
- 4 (DC, C) - 8W8
- -
- 3 (DB, B) High Density
- 1 (DE, E) High Density
- 4 (DC, C) - 21WA4
- 2 (DA, A) - 7W2; 2 (DA, A) - 7W2
- 3 (DB, B) - 5W5
- 3 (DB, B) - 9W4
- 2 (DA, A) - 11C1, 11W1
- 3 (DB, B) - 13C3, 13W3
- 2 (DA, A) - 7W2
- 2 (DA, A) - 3W3
- 3 (DB, B) - 17W2
- 4 (DC, C) - 17W5
- 1 (DE, E) - 2V2, 2W2C
- 2 (DA, A) - 3V3, 3W3K, 3W3CS
Materiale della conchiglia, finitura
- -
- Housing/Shell (4-40)
- Board Side (4-40)
- Housing/Shell (Unthreaded)
- Cable Side (4-40)
- Mating Side, Female Screwlock (4-40)
- Board Side (4-40); Mating Side (4-40)
- Mating Side (4-40)
- Board Side (M3)
- Board Side (4-40); Mating Side, Female Screwlock (4-40)
- Cable Side (4-40); Mating Side, Female Screwlock (4-40)
- Cable Side (4-40); Mating Side (4-40)
Spaziatura del backset
- -
- Steel
- Steel, Tin Plated
- Brass, Tin Plated
- Copper Alloy, Tin Plated
- Steel, Tin-Nickel Plated
- Steel, Yellow Chromate Plated
- Steel, Yellow Chromate Plated Zinc
- Zinc Die Cast, Nickel Plated
Modulo di contatto
- -
- 0.370" (9.40mm)
- 0.314" (7.98mm)
- 0.283" (7.20mm)
- 0.189" (4.80mm)
- 0.450" (11.43mm)
- 0.395" (10.03mm)
- 0.318" (8.09mm)
- 0.287" (7.28mm)
- 0.367" (9.31mm)
- 0.459" (11.65mm)
- 0.458" (11.63mm)
Materiale dielettrico
- -
- Machined
- Stamped
Indicazione di stacking
- -
- Thermoplastic
- Polyamide (PA66), Nylon 6/6
- Polyamide (PA), Nylon
- Polybutylene Terephthalate (PBT), Polyester
- Polyester
- Polybutylene Terephthalate (PBT), Glass Filled
- Polybutylene Terephthalate (PBT), Polyester, Glass Filled
- Polyester, Glass Filled
Centro Contatto Materiale
- Tin
- -
- Gold
Dimensione compatibile di D-Sub
- E
- C
- -
- D
- B
- A
- B, B
- A, A
- E, E
Uscita del cavo
- 9pos and HD15pos
- 37pos and HD62pos
- -
- 50pos and HD78pos
- 25pos and HD44pos
- 15pos and HD26pos
- (25pos and HD44pos) and (25pos and HD44pos)
- (15pos and 26pos) and (15pos and 26Pos)
- (9pos and HD 15pos) and (9pos and HD15pos)
La placcatura
- 180°
- 90°
- 45°, 180°
- -
- 45°
- 90°, 180°
- 40°, 180°
- 30°, 180°
- 40°
- 30°
La ferrament
- Nickel
- -
- Metal
- Zinc
- Tin
Spessore di terminazione
- Assembly Hardware, Cable Clamp, Strain Relief
- Assembly Hardware, Strain Relief
- Assembly Hardware, Cable Clamp
- Assembly Hardware
- -
- Assembly Hardware, Grommets
- Strain Relief
- Cable Clamp
Spessore di finitura del guscio
- -
- 8.00µin (0.203µm)
- Flash
Lunghezza - Porzione filettata sotto la testa
- -
- 320µin (8.13µm)
- 315µin (8.00µm)
Lunghezza - Sotto la testa
- -
- 0.433" (11.00mm)
- 0.315" (8.00mm)
- 0.256" (6.50mm)
- 0.299" (7.59mm)
- 0.528" (13.40mm)
Connettore/tipo di contatto
- -
- 0.315" (8.00mm)
- 0.433" (11.00mm)
- 0.256" (6.50mm)
- 0.299" (7.60mm)
- 0.394" (10.00mm)
- 0.551" (14.00mm)
- 0.181" (4.60mm)
Immagini | Prezzi | Quantità | Disponibilità | N. Parte Mfr. | eBee Part# | Manufacturer | Product Name | Description | RoHS | Confezione | Imballaggio |
|---|
- 1
- 2
- 3
- 4
- 5
- 6
- 196