Smart Thermostat for Air Source Heat Pump System
EB-001WAS is a thermostat specially designed for air source heat pump system, stylish piano key shape and simple installation design, it not only meets the temperature control of heating and cooling, but also provides smart phone remote control, voice control and other functions in smart home.
Main Features
EB-001WAS thermostat is designed for smart commercial, industrial and home use and is the Reddot design adward 2018 winner.
On the display screen, a highly recognizable icon is designed according to the corresponding functions. The negative display screen plus acrylic panel can provide a good display effect in any use scenario. Users can enjoy a good interactive interface during operation.
The stylish piano key design, advanced pigment coating technology and stable mechanical structure are not only suitable for modern decoration style, but also provide convenient and efficient operation solution.
It adopts the widely used 86 * 86 and European 60mm combination, which is suitable for most users in the world. In addition, the hook type installation is very convenient.
Excellent Screen Design
- We have designed high identification icons for heating function, lock screen function, cloud connection, WiFi connection, home mode, digital display and other functions
- LCD negative display screen has the characteristics of good visual impact, not easy to reflect light, good concealment and low energy consumption
Piano Button Design
- Advanced surface coating
- Stable mechanical structure, long service life
- Large key, easy to operate
- Professional aesthetic design
Parameters
| Model | EB-001WAS |
|---|---|
| Color | White/Silver |
| Screen | LCD |
| Input | 220 VAC ± 10%50/60 HZ |
| Sensor | NTC 10K B:3950 |
| Temp Range | 5~35℃ |
| Accuracy | ±1℃ |
| Size | 86*86*13 mm |
| Output | 5A/220VAC |
| Power Consumption | ≤1.7 KWh/month |
| APP | Android / iOS |
Dimension
Screen & Button Reference
a: Current Temperature
b: Target Temperature
c: Loading, Lock, Cloud Connection, WiFi Connection (from left to right)
Press ” M “: Switch Heating or Cooling
Press ” M ” 3 seconds: Power on or off
Press ” + “: Increase the temperature
Press ” – “: Decrease the temperature
Press ” – ” 3 seconds: Enter the WiFi pairing mode
Press ” Fan “: Switch the speed
” M “” – “: Press ” M ” and ” – ” together for 3 seconds to lock or unlock
Wiring Diagram
- Pin 1: COM
- Pin 2: Low Speed
- Pin 3: Medium Speed
- Pin 4: High Speed
- Pin 5: Underfloor Heating Valve
- Pin 6: Air Conditioning Valve
- Pin 7: Connect to Negative Wire (N)
- Pin 8: Connect to Live Wire (L)
- Pin 9 & 10: Dry Contact
Installation Instruction
- Environment: Install to a 86*86mm box, power by 240V AC
- Power off: Before you install, must cut off the power
Install Steps
- I: Connect each wiring
- II: Connect the steel to the 86 box
- III: Buckle up the power box and panel
Connect To the WiFi Internet
- Step #1: search “Smart Life” in Google Play or Apple Store and install the APP
- Step #2: press ” – ” button for 3 seconds, WiFi signal/icon will flash quickly in the screen
- Step #3: open the APP, and enter the “add device” page, select the type of product
- Step #4: input the SSID and password, then pairing
- Step #5: APP will automatically complete the connection, turn to the APP home page and start to use the APP for thermostat control
Advanced Settings
Turn on the thermostat, keep pressing the ” + ” and ” – ” buttons for about 3 seconds, press ” fan ” to enter the setting function, and press ” + ” and ” – ” to configure the below configuration options. Press ” M ” or without any operation in 10s, will confirm the current setting and return to main menu.
- Code #1: Return difference value: Default 3℃
- Code #2: Sensor type (00: Internal Sensor 01: External Sensor 02: Internal & External Sensor Default: 00)
- Code #3: The fan switch: Wether close the fan while the room temperature is reach to set temperature (0: No 1: Yes Default: 1 Only use in Cooling mode)
- Code #4: Swing: 1-9℃, default 2℃
- Code #5: Temperature calibration: -9℃~+9℃, default is 0℃
- Code #6: Highest target temperature: 35~90℃, default is 35℃
- Code #7: Lowest target temperature: 0~30℃, default is 5℃
- Code #8: System restart, when the screen shows ” RE “, press ” M ” to confirm
- Code #9: Factory setting, when the screen showed ” DF “, press ” M ” to confirm
Other Operation
- a. External & Internal Temperature Check: long press the ” M ” and ” + ” to switch the internal temperature or the external temperature
- b. Temperature Protection Warning: when the temperature is higher the protection value, loading icon will flash, the heater stops working, and adjust the temperature to 2℃ lower of the protection value, loading icon will stop flash and the protection mode cancel
- c. ERR Exception: when the ” err ” icon light up, it means the sensor mode was wrong or the sensor was broken, then the temperature value in the screen will show ” — “
Tip
In order to improve product quality and experience, the product may be upgraded many times.
System Diagram
